Damansara Sliding Autogate Motor Repair – Noisy Gate Problem Solved

A customer in Bukit Damansara contacted us because their sliding autogate was making very loud noise whenever the gate opened or closed. The noise was so loud that even the neighbours could hear when the customer arrived home.

The customer also told us that one day the sliding autogate suddenly got stuck halfway. They used the manual release to unlock the autogate motor and tried to push the gate manually. However, the gate was very heavy and difficult to move.

The customer suspected that the sliding autogate rollers or wheels were damaged. They contacted a few autogate contractors in Damansara, but were told that the rollers could not be repaired or replaced.

Finally, the customer contacted us. Based on the problem described, we also suspected that the sliding autogate roller was faulty. After checking the gate, we found that the stainless steel roller bearing had broken and become jammed. Because of this, the roller could not turn smoothly, causing loud noise and making the gate very heavy to push manually.

The customer’s stainless steel sliding autogate was using 2 stainless steel rollers, one at the front and one at the back. Luckily, we had the same type of 304 stainless steel sliding autogate rollers ready stock.

We replaced the damaged sliding autogate roller wheels, and now the gate operates smoothly, quietly, and much easier again.

Replace Sliding Auto Gate Wheel Damansara

Why Sliding Autogate Rollers Become Noisy

Loud noise during opening and closing is a very common problem for old sliding autogate systems. Sounds like scraping, knocking, or rough movement are usually caused by damaged or worn-out sliding autogate rollers underneath the gate.

When the sliding autogate roller cannot rotate smoothly, the gate becomes heavier and the autogate motor has to work harder to move the gate.

If the sliding autogate roller problem is not repaired early, it may also damage other parts such as:

• Autogate motor

• Gear rack

• Sliding gate track

That is why we always advise customers to check and repair their sliding autogate roller once they hear unusual noises. Early repair can help prevent bigger problems and more expensive repair costs later.

Sliding Auto Gate Roller Repair Damansara

Proper Maintenance for Sliding Autogate Rollers

To make sliding autogate rollers last longer, regular maintenance is very important. We usually advise customers to spray WD40 lubricant on the autogate roller and bearing area at least once a week.

Besides that, always make sure the sliding gate track is clean from sand, small stones, leaves, or rubbish that may block the gate movement.

Whenever we perform a sliding autogate roller replacement, our technicians will also guide customers on the proper maintenance method and show which parts should be lubricated with WD40. Simple maintenance like this helps the autogate move more smoothly, reduces noise, and lowers the risk of sudden breakdowns.

Specialists in Autogate Motors and Gate Repairs

Still searching for a reliable autogate company that can solve your gate and autogate problems properly?

Stop searching and contact us today. We provide trusted autogate brands such as the Tronica sliding autogate system, including:

• Tronica® 328 DC Sliding Autogate System

• Tronica® AC Sliding Autogate System

We supply sliding autogate systems that support gates from 1500kg up to 6000kg heavy-duty industrial applications.

Besides autogate motors, we also handle:

• Sliding autogate roller replacement

• Sliding gate wheel replacement

• Folding autogate roller replacement

• Gate roller repair

• Gate bearing repair

• Gate alignment and levelling

• Repair for gates that cannot close properly

• Repair for sagging or uneven gates

We carry ready autogate spare parts directly to your location so most autogate problems can be solved in just one visit. We repair and service many popular autogate brands and models including DCMoto DC925, DC975, DNOR 212, DNOR 712, DNOR 212K, and OAE 333A autogate systems.
We provide autogate repair services throughout KL and Selangor. If your autogate isgiving problems, contact us today and we will help restore your autogate quickly and professionally.

Office: 03 – 8062 5891
Sales / WhatsApp: 012 – 405 8791